A complete power cord and IEC power socket assembly with screws. An easy way to add power to your pedalboard.
The ends of the power cord have been stripped with terminal clips crimped on then assembled with the IEC power socket in the correct orientation. Has been fully tested and verified in working order.
Note: To install, cut a rectangular hole just large enough for the power socket (1-1/16″ x 13/16″). Then, take note as to which color wire is attached to which terminal and disconnect the power socket and feed the power cord thru the hole. Next, reconnect the IEC socket to the terminal clips. Green=ground (middle), black=load (L), white=neutral (N). Lastly, simply wrap the terminal clips and colored wires with black electrical tape or duct tape for safety.
Power Cord Specs
IEC Socket Specs
• 3 Pins
• C14 Inlet Power Plug Socket
• AC 250V 10A